Chemical Bamboo Preservation

Chemical bamboo preservation (with or without the help of special equipment) ensures long term protection. Depending upon the method of bamboo treatment, chemical preservatives can impart short term or long term protection.

On this page you will find formulations of single compounds or mixtures which protect bamboo against biological attacks and degradation. With a few exceptions, chemical preservatives are toxic. Selection and application has to be done with great care to meet performance, environment requirements and safetly. Depending upon the carrier solvents, bamboo preservatives are divided into different categories:

Non-Fixing Type Preservatives

Non-fixing bamboo preservatives mainly consist of boron salts, which are effective against borers, termites and fungi (except soft rot fungi). These boron salts are dissolved in water. After treatment, the water evaporates leaving the salts inside the bamboo. They are not toxic and can be used for treating bamboo products like baskets, dry containers, etc. which come in contact with food products.

Boric Acid Borax

Formula:

• boric acid / borax
• ratio 1:1.5

Or

• boric acid / borax / sodium dichromate
  
• ratio 2:2:0.5

Recommended concentration:

• 4-5% indoor use (not exposed to weather or ground contact)

Fixing Type Preservatives

These chemical bamboo preservation formulations are proportionate mixtures of different salts which interact with each other in the presence of bamboo and become chemically fixed. In principle, the degree of fixation and efficacy depends upon the nature of the components and their combination and concentration.

For example, Chromium is responsible for fixation, copper is effective against decay fungi and soft rot and the third compound acts against insect and fungus. The process of fixation requires some weeks during which the material should be stored under cover. Slow fixation is preferred in case of bamboo as it allows diffusion and better distribution of preserving salts.

Copper Chrome Arsenic (CCA)

CCA is a heavy duty broad spectrum chemical bamboo preservative patented as AsCu. It has been found to provide protection for 50 years or more. Outdoor use is recommended only due to the arsenic component, which can also causes a green coloration on the bamboo.

Formula:

• arsenic pentoxide / copper sulphate / sodium dichromate
• ratio 1:3:4

Recommended concentration:

• 6% outdoor use (structures exposed to weather but not in contact with ground)
• 10% outdoor use (structures exposed to weather and in ground contact)

Copper Chrome Boron (CCB)

CCB is a broad spectrum chemical bamboo preservative and a good alternative to CCA, but less effective with a lower degree of fixation, because of the boron component.

Formula:

• boric acid / copper sulphate / sodium dichromate
• ratio 1.5:3:4

Recommended concentration:

• 6-8% indoor use (not exposed to weather or ground contact)
• 8-10% outdoor use (structures exposed to weather and in ground contact)

Zinc Chrome

Zinc Chloride is highly hygroscopic and treated bamboo will give a wet look in rainy season. This can adversely help paints and other finishes.

Formula:

• Zinc chloride / sodium dichromate
  
• ratio 1:1

Recommended concentration:

• 10% outdoor use (structures exposed to weather and in ground contact)

Copper Chrome Acetic

Formula:

• copper sulphate / sodium dichromate / acetic acid
  
• ratio 5.6:5.6:0.25

Recommended concentration:

• 8% outdoor use (structures exposed to weather and in ground contact)

Fire Retardant Preservative

This treatment is intended to protect materials against fire as well as decay and insect attack.

Formula:

• boric acid / copper sulphate / zinc chloride / sodium dichromate
  
• ratio 3:1:5:6

Recommended concentration:

• 25% indoor and outdoor use

Oily Preservatives: Creosote

It is a broad spectrum bamboo preservative and is a cost effective chemical for treatment for exterior applications. It has been used for treating railway sleepers and wooden poles.

Coal tar and creosote available from coal is a dark brown viscous liquid. Creosote should be used exclusively for pressure processes or hot and cold treatment. Being oily, it imparts water repellence to the treated material. It is effective against fungal and insect attack. Due to its dark brown color and bad odor, its use is restricted to exterior applications, especially in contact with mud/ ground.

Light Organic Solvent-based Preservatives (LOSP)

These are slightly more expensive bamboo preservatives where the organic solvent acts as a carrier for toxic molecules and later evaporates, leaving the active ingredients behind. They are available commercially in ready-to-use forms. A good formulation is an appropriate mixture of fungicides and insecticides. There is little change of color of the treated material but a residual odor may remain for some time. The method of use will be recommended by the manufacturer. Formulations available in concentrates are more economical to use.

Trichlorophenol (TCP)

It is a more eco friendly substitute for Pentachlorophenol. Ready to use (5%) solution of this fungicide along with insecticides for broad spectrum performance are commercially available. Concentrates which can be diluted with mineral turpentine oil are more economical for industrial use.

Copper/Zinc soaps

They have emerged as alternatives to other organic preservatives which cause environmental hazards. Napthenates of copper and zinc are most common (metallic soaps). They are available as ready-to-use formulations containing appropriate amounts of insecticides. They are slightly more expensive than TCP formulations. However, they are more eco-friendly and also have no pungent smell.

Sources: The National Mission on Bamboo Applications (NMBA)